徐工rp756摊铺机配件与维修

产品描述

法兰(Flange)，又叫法兰凸缘盘或突缘。法兰是管子与管子之间相互连接的零件，用于管端之间的连接;也有用在设备进出口上的法兰，用于两个设备之间的连接，如减速机法兰。法兰连接或法兰接头，是指由法兰、垫片及螺栓三者相互连接作为一组组合密封结构的可拆连接。管道法兰系指管道装置中配管用的法兰，用在设备上系指设备的进出口法兰。法兰上有孔眼，螺栓使两法兰紧连。法兰间用衬垫密封。法兰分螺纹连接(丝扣连接)法兰、焊接法兰和卡夹法兰。法兰都是成对使用的,低压管道可以使用丝接法兰，四公斤以上压力的使用焊接法兰。两片法兰盘之间加上密封垫，然后用螺栓紧固。不同压力的法兰厚度不同，它们使用的螺栓也不同。水泵和阀门，在和管道连接时，这些器材设备的局部，也制成相对应的法兰形状，也称为法兰连接。凡是在两个平面周边使用螺栓连接同时封闭的连接零件，一般都称为"法兰"，如通风管道的连接，这一类零件可以称为"法兰类零件"。但是这种连接只是一个设备的局部，如法兰和水泵的连接，就不好把水泵叫"法兰类零件"。比较小型的如阀门等，可以叫"法兰类零件"。

减速机法兰，用于电机与减速机的连接，以及减速机与其它设备之间的连接。

免责声明丨 部分内容来源网络！本文仅供交流学习 , 版权归属原作者，部分图片、内容推送时未能及时与原作者取得联系，若来源标注错误或侵犯到您的权益烦请告知，我们将立即删除.

联系人：梁经理

联系方式：13645201509

（微信同号）

QQ：2870202745

Flange, also known as flange flange or flange. Flanges are the parts connecting pipes and pipes, which are used for the connection between pipe ends; The flange on the equipment inlet and outlet is also used for the connection between two equipment, such as the reducer flange. Flange connection or flange joint refers to the removable connection of flange, gasket and bolt as a group of combined sealing structure. The pipe flange refers to the flange used for piping in the pipeline device, and the inlet and outlet flanges of the equipment when used on the equipment. There are holes on the flange, and bolts make the two flanges tightly connected. The flanges are sealed with gaskets. The flange is divided into threaded connection (threaded connection) flange, welding flange and clamp flange. Flanges are used in pairs. Wired flanges can be used for low pressure pipes, and welded flanges can be used for pressure above 4kg. Add a gasket between the two flanges and fasten them with bolts. The thickness of flange under different pressure is different, and the bolts used are also different. When pumps and valves are connected with pipes, parts of these equipment are also made into corresponding flange shapes, also known as flange connection. All connecting parts that are bolted around two planes and closed at the same time are generally referred to as "flanges", such as the connection of ventilation pipes. Such parts can be referred to as "flange parts". But this kind of connection is only a part of the equipment, such as the connection between the flange and the water pump, so it is not easy to call the water pump "flange parts". Smaller parts such as valves can be called "flange parts".

Reducer flange is used for the connection between motor and reducer, as well as the connection between reducer and other equipment.

Disclaimer | Part of the content comes from the network! This article is only for exchange and learning. The copyright belongs to the original author. Some pictures and content are not timely contacted with the original author when being pushed. If the source label is incorrect or infringes your rights and interests, please inform us and we will delete it immediately

Enterprise introduction

The company supplies paver parts, roller parts, milling machine parts, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument support, hydraulic pump and accessories. Our factory also supplies vulnerable parts of pavers, paver balance beams, auger shafts, pedals, feeding soleplates, blades, screeds, reducers, chain tracks, track shoes, rollers, scraper large chains, feeding chains, etc.

Contact: Manager Liang

Contact: 13645201509

(WeChat with the same number)

QQ：2870202745