产品描述
摊铺机夯锤的设计原则是什么？
设计原则为重心低，稳定性好，产生负压和气垫作用小，这样可以减少起吊力的夯击力的损失。一般锤身设有若干孔洞，这样可以克服提升时土和锤底之间强大吸力，减少落锤时空气阻力，并能排出夯击时锤底与土之间的空气，保证有效夯击能量。锤重大小应根据要求的有效加固深度选用。夯锤的底面积大小与土的类型有关。
免责声明丨 部分内容来源网络！本文仅供交流学习 , 版权归属原作者，部分图片、内容推送时未能及时与原作者取得联系，若来源标注错误或侵犯到您的权益烦请告知，我们将立即删除.
企业介绍
联系人：梁经理
联系方式：13645201509（微信同号）
QQ：2870202745
What is the design principle of the tamping hammer of the paver?
The design principle is low center of gravity, good stability, low negative pressure and air cushion effect, which can reduce the loss of lifting force and tamping force. Generally, the hammer body is equipped with several holes, which can overcome the strong suction between the soil and the hammer bottom during lifting, reduce the air resistance during hammer drop, and discharge the air between the hammer bottom and the soil during compaction, ensuring effective compaction energy. The weight of the hammer should be selected based on the required effective reinforcement depth. The bottom area of the rammer is related to the type of soil.
Disclaimer | Part of the content comes from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly communicated to the original author during push notifications. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it
Enterprise Introduction
The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument support, hydraulic pump and accessories. Our factory also supplies vulnerable parts of paver, balance beam of paver, auger shaft, pedal, conveying bottom plate, blade, screed, reducer, chain rail, track plate, supporting wheel, scraper large chain, conveying chain, etc.
Contact person: Manager Liang
Contact information: 13645201509 (same WeChat account)
QQ：2870202745
您的专属咨询顾问：梁经理
咨询电话：13645201509
详细地址：徐州市泉山区段庄街道矿山路
备案号：05039780