徐工rp756摊铺机配件与维修
推荐产品
$Pros$
联系我们
全国咨询热线:
13645201509

您的专属咨询顾问:梁经理
咨询电话:13645201509
详细地址:徐州市泉山区段庄街道矿山路
备案号:05039780

[肯纳刀头# 1825565]

  • 产品分类:铣刨机配件
  • 产品描述:
  • 订购热线:13645201509
产品详情
肯纳刀头# 1825565

产品描述

铣刨机刀头工作原理:铣削转子是铣刨机的主要工作部件,它由铣削转子轴、刀座和刀头等组成,直接与路面接触,通过其高速旋转的铣刀进行工作而达到铣削的目的。铣刨机上设有自动调平装置,以铣削转子侧盖作为铣削基准面,控制两个定位液压缸,使所给定的铣削深度保持恒定;其液压系统用来驱动铣削转子旋转、整机行走、辅助装置工作等,一般为多泵相互独立的闭式液压系统,工作时互不干扰且可靠性较高;有的铣刨机根据需要安装倾斜调整器,用来控制转子的倾斜度;一般大型铣刨机都有由传送带和集料器组成的集料输送装置,它可将铣削出的散料集中并传送至随机行走的运载汽车上,输送臂的高度可以调节并可左右摆动,以调整卸料位置。铣刨机规格、型号不同时,其结构、布置也略有区别,但基本工作原理相同或相似。铣刨机动力传动的路线:发动机→液压泵→液压马达、液压缸→工作装置。

免责声明丨 部分内容来源网络!本文仅供交流学习 , 版权归属原作者,部分图片、内容推送时未能及时与原作者取得联系,若来源标注错误或侵犯到您的权益烦请告知,我们将立即删除.

 

企业介绍

公司供应摊铺机配件,压路机配件,铣刨机配件,摊铺机刮板驱动轴,刮板驱动轴总成,找平仪,找平仪支架以及液压泵和配件。我厂还供应摊铺机易损件,摊铺机平衡梁,搅龙轴,踏板,输料底板,叶片,熨平板,减速机,链轨,履带板,支重轮,刮板大链条,输料链条等。

 

联系人:梁经理

联系方式:13645201509

(微信同号)

QQ:2870202745

 

 

 

QQ邮箱:2870202745@qq.com

网易邮箱:LS13645201509@163.com

Working principle of milling machine tool head: The milling rotor is the main working component of the milling machine, which is composed of the milling rotor shaft, tool seat, and tool head. It directly contacts the road surface and works through its high-speed rotating milling cutter to achieve the purpose of milling. The milling machine is equipped with an automatic leveling device, which takes the milling rotor side cover as the milling reference plane and controls two positioning hydraulic cylinders to maintain a constant milling depth; The hydraulic system is used to drive the rotation of milling rotors, the walking of the entire machine, and the operation of auxiliary devices. It is generally a closed hydraulic system with multiple independent pumps, which does not interfere with each other and has high reliability during operation; Some milling machines are equipped with tilt adjusters as needed to control the inclination of the rotor; Generally, large milling machines have an aggregate conveying device composed of a conveyor belt and a feeder, which can concentrate the milled loose materials and transport them to a randomly moving transport vehicle. The height of the conveying arm can be adjusted and can swing left and right to adjust the unloading position. The specifications and models of milling machines vary slightly, but their basic working principles are the same or similar. The power transmission route of the milling machine: engine → hydraulic pump → hydraulic motor, hydraulic cylinder → working device.

Disclaimer | Part of the content comes from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly communicated to the original author during push notifications. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it

Enterprise Introduction

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. Our factory also provides vulnerable parts for pavers, balance beams for pavers, auger shafts, pedals, conveying soleplates, blades, ironing plates, reducers, chain tracks, track shoes, supporting wheels, scraper chains, conveying chains, etc.

Contact person: Manager Liang

Contact information: 13645201509

(Same WeChat account)

QQ: 2870202745

QQ email: 2870202745@qq.com

NetEase email: LS13645201509@163.com

 

免责声明: 本页产品如有侵权请联系我们进行删除处理!联系电话:18705218934

您的专属咨询顾问:梁经理
咨询电话:13645201509
详细地址:徐州市泉山区段庄街道矿山路
备案号:05039780

* 表示必填采购:肯纳刀头# 1825565
*联系人:
请填写您的姓名,方便我们联系您
*手机号码:
请填写您的手机号码
电子邮箱:
请填写您的电子邮件
备注:
 
请填写您的问题描述有您的支持,是我们不断前进的动力,感谢您的支持。
 
请输入您的姓名:

请输入手机号码: