产品描述
摊铺机刮板驱动轴就是带动刮板大链条起到输送料斗中的物料的作用。
刮板链条常见的故障:A 链条太松，与沥青混合料相刮碰。B 沥青混合料中混入钢筋等杂物，将链条卡死，使刮板不能转动。C 摊铺机底板连接螺栓松动或底板开裂翘曲，将刮板输料器卡死。D 右侧刮板链条断裂。E 刮板链条前后两端轴承损坏。一般是因为轴承外面的油封和尘封套损坏，沥青混合料进入后，引起刮板卡死或阻力过大，致使轴承损坏传动链条材料为优质的合金钢材。
免责声明丨 部分内容来源网络！本文仅供交流学习 , 版权归属原作者，部分图片、内容推送时未能及时与原作者取得联系，若来源标注错误或侵犯到您的权益烦请告知，我们将立即删除.
公司供应摊铺机配件，压路机配件，铣刨机配件，摊铺机刮板驱动轴，刮板驱动轴总成，找平仪，找平仪支架以及液压泵和配件。还供应摊铺机易损件，摊铺机平衡梁，搅龙轴，踏板，输料底板，叶片，熨平板，减速机，链轨，履带板，支重轮，刮板大链条，输料链条等。
联系人：梁经理
联系方式：13645201509
（微信同号）
QQ：2870202745
QQ邮箱：2870202745@qq.com
网易邮箱：LS13645201509@163.com
WhatsApp:+86 13645201509
The scraper drive shaft of the paver drives the scraper chain to transport the materials in the hopper.
Common faults with scraper chains: A chain is too loose and collides with asphalt mixture. Mixing steel bars and other debris into the asphalt mixture causes the chain to get stuck, preventing the scraper from rotating. The connecting bolts of the bottom plate of the C paver are loose or the bottom plate is cracked and warped, causing the scraper feeder to get stuck. The scraper chain on the right side of D is broken. The bearings at both ends of the scraper chain are damaged. Usually, it is due to damage to the oil seal and dust cover outside the bearing. After the asphalt mixture enters, it causes the scraper to get stuck or the resistance to be too high, resulting in bearing damage. The transmission chain material is high-quality alloy steel.
Disclaimer | Some content is sourced from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly contacted when pushed. If the source annotation is incorrect or infringes on your rights, please inform us and we will immediately delete it
Company Introduction
The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. We also supply vulnerable parts for pavers, including balance beams, agitator shafts, pedals, feeding base plates, blades, ironing plates, reducers, chain rails, track plates, support wheels, scraper chains, and feeding chains.
Contact: Manager Liang
Contact information: 13645201509
(Same WeChat account)
QQ：2870202745
QQ email: 2870202745@qq.com
NetEase email: LS13645201509@163.com
WhatsApp:+86 13645201509
您的专属咨询顾问：梁经理
咨询电话：13645201509
详细地址：徐州市泉山区段庄街道矿山路
备案号：05039780