1880法兰盘，下链轮#200102849

法兰是轴与轴之间相互连接的零件，用于管端之间的连接，也有用在设备进出口上的法兰，用于两个设备之间的连接，如减速机法兰，又叫法兰凸缘盘或突缘。

管道法兰系指管道装置中配管用的法兰，用在设备上系指设备的进出口法兰。法兰上有孔眼，螺栓使两法兰紧连。法兰间用衬垫密封。法兰分螺纹连接（丝扣连接）法兰、焊接法兰和卡夹法兰。法兰都是成对使用的,低压管道可以使用丝接法兰，四公斤以上压力的使用焊接法兰。

 

免责声明丨 部分内容来源网络！本文仅供交流学习 , 版权归属原作者，部分图片、内容推送时未能及时与原作者取得联系，若来源标注错误或侵犯到您的权益烦请告知，我们将立即删除.

 

 

 

 

企业介绍

公司供应摊铺机配件，压路机配件，铣刨机配件，摊铺机刮板驱动轴，刮板驱动轴总成，找平仪，找平仪支架以及液压泵和配件。还供应摊铺机易损件，摊铺机平衡梁，搅龙轴，踏板，输料底板，叶片，熨平板，减速机，链轨，履带板，支重轮，刮板大链条，输料链条等。

 

联系人：梁经理

联系方式：13645201509

（微信同号）

QQ：2870202745

 

 

QQ邮箱：2870202745@qq.com

 

网易邮箱：LS13645201509@163.com

 

A flange is a component that connects shafts and is used for connecting pipe ends. It is also used as a flange on the inlet and outlet of equipment for connecting two devices, such as a reducer flange, also known as a flange flange or flange.

 

Pipeline flange refers to the flange used for piping in pipeline equipment, and when used on equipment, it refers to the inlet and outlet flanges of the equipment. There are holes on the flange, and bolts make the two flanges tightly connected. Seal the flanges with gaskets. The flange is divided into threaded connection (threaded connection) flange, welded flange, and clamp flange. The flanges are used in pairs, and threaded flanges can be used for low-pressure pipelines, while welded flanges are used for pressures above four kilograms.

 

Disclaimer | Part of the content is sourced from the internet! This article is for communication and learning purposes only, and the copyright belongs to the original author. Some images and content were not promptly communicated to the original author. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it

 

Enterprise Introduction

 

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. We also supply vulnerable parts for pavers, balance beams, agitator shafts, pedals, feeding soleplates, blades, ironing plates, reducers, chain tracks, track shoes, supporting wheels, scraper chains, feeding chains, etc.

 

Contact person: Manager Liang

 

Contact information: 13645201509

 

(Same WeChat account)

 

QQ：2870202745

 

QQ email: 2870202745@qq.com

 

 

 

NetEase email: LS13645201509@163.com